상품이미지
Teradek Bolt 600 (1:1) 12시간: ₩100,000 24시간: ₩100,000
INFORMATION





    With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable, manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:

    Longer Range

    Transmit visually lossless
    video up to 1000ft
    with no delay.

    20MHz Channels

    Use more than twice as many Bolts in one location or avoid interference like never before.

    2 New DFS Channels

    Operate interference-free
    more often in the USA and Europe by making use of two newly introduced DFS channels.

    20% Smaller Chassis

    Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.

    Individual Identity

    Easily identify which Bolt
    TX and RX work together with removable colored top plates.

    Rapid Reconnection

    Reconnect times during a dropped link are now instantaneous once you move back into range.

    Built-In HDMI to SDI Converter

    Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.

    More Robust
    Than Ever Before

    Reach your Bolt’s full range
    and potential right out of
    the box with new software
    that provides the most robust wireless link we’ve ever created.





    Wireless Video Refined

    Bolt transmits visually lossless 4:2:2 video over the unlicensed 5GHz band at less than 1 millisecond of delay. Bolt’s new firmware ensures your system reaches its full potential right out of the box. We’ve also improved reconnect times so your wireless link is restored instantly when you come back into range.


    Reliable Transmission in Any Environment

    Operate more than twice as many wireless systems at one location or evade heavy interference. With Bolt 3000, you can transmit over 20MHz channels for a more robust signal in challenging RF conditions.

    *20MHz channels allow you to operate more wireless systems at once in a single location and offer a more robust wireless link in challenging RF conditions. However, audio transmission, as well as interlaced, PSF, and 1080p60/50 frame rates are not currently supported.

    Diagram displaying Bolt 1000 and Bolt 3000 being used on 20Mhz/40MHz Channels


    Smaller, Lighter, and Even More Rugged

    The Bolt 1000 and 3000 transmitters are 20% smaller than previous systems and lighter too. We’ve also improved their resilience in high heat conditions so that they operate flawlessly all the way up to 130F.


    Bolt 100 and 3000 display of dimension and weight


    More Range for the Buck

    The new Bolt is not only more capable in every way, but more affordable too. Compared to older systems, the new Bolt 3000 gives you 35% more for your money.

    Bolt 2000Bolt 3000
    $4.50/ft

    $3.33/ft

    35%


























































































    Spectrum graph display of the additional channels the Bolt is capable of streaming



    More Channels to Transmit Over

    Bolt also offers manual frequency control so your crew can carefully manage your wireless workflow wherever you’re shooting. The Bolt 3000 can operate on 2 new DFS channels, allowing interference-free video transmission in more environments than ever before.


    Transmit to Multiple Receivers

    All Bolt models are multicast capable up to 4 receivers of the same range at the same time. This means you can send your video feed to monitors, switchers, recorders, and even Teradek Cubes simultaneously with no loss in quality or added delay.

    Diagram of Bolt transmitter multicasting to Cube Encoders, Handheld monitors, Monitors and switchers
























    Built-in Cross Conversion

    Every Bolt model supports real-time standards and cross conversion from TX to RX, allowing you to automatically convert resolution, frame rate, and inputs.outputs (HDMI / 3G-SDI) without any additional hardware.

    Display of Cross conversion of Bolt on Inputs and outputs


    Metadata & Time Code Support

    All 3G-SDI Bolt models support metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic.

    For a detailed list of supported products, please visit our Knowledge Base.


    A Bolt Receiver in hand with icons for timecode and metadata



    3D LUT Integration

    Apply the look you’re after directly to your wireless video feed using Bolt’s integrated 3D LUT technology. Upload your own LUTs using the free Bolt Manager software or select from a number of built-in presets using Bolt’s OSD.


    Cut Through the Interference

    The Panel Array Antenna is your go-to solution for cutting through wireless interference in crowded environments. When attached to a Bolt 1000 or 3000, the antenna provides an extremely robust directional signal that will ensure your signal arrives uninterrupted.


    Built-In HDMI to SDI Converter

    Perfect for use with MoVI and other gimbals, Bolt’s TX features a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.



    Use of the built-in HDMI to SDI converter on the Bolt Transmitter by connecting the output to a smallHD monitor













연관상품